H-DL: ARINC 615A Data Loader
Load and retrieve software on H-series computers at gigabit line rate, in the lab or on the aircraft
ARINC 615A is the avionics standard for loading software and data onto aircraft equipment over Ethernet. The Hover Data Loader (H-DL) implements the standard for the H-series Integrated Modular Avionics (IMA) computers, loading and retrieving software in the lab, in production, or on the aircraft while the computer remains installed.
Gigabit line rate
H-DL loads over gigabit Ethernet at line rate, reducing load times for large software configurations in the lab, in production, and on the aircraft.
Verified loads
Every load is checked with MD5, computed by the processor's hardware security engine in parallel with the transfer, so verification does not extend the load time.
Standard ARINC 615A operations
H-DL implements the ARINC 615A protocol over the Trivial File Transfer Protocol (TFTP), with the standard upload, download, find, and information operations, for the software and data that make up an H-series configuration, including software applications for the ARINC 653 RTOS.
Loader and target from one vendor
The ARINC 615A target is built into every H-series computer, and H-DL is the loader developed for it, so there is no third-party target software to integrate. A computer enters loading mode only through a dedicated configuration input and a power cycle, so software cannot be loaded by accident in flight.
Interactive or scripted
H-DL runs interactively or from command-line arguments, so the same tool serves engineers and automated scripts in the lab, in production, or on the aircraft.
Where it is used
- Development and integration in the lab
- Production programming and acceptance testing
- Field loading with the computer installed on the aircraft
Data loader
- Standard
- ARINC 615A
- Speed
- Gigabit Ethernet, line rate
- Transport
- TFTP over Ethernet
- Operations
- Upload, download, find, information
- Verification
- MD5, hardware accelerated
- Modes
- Interactive and scripted command line