H2.X Single-Channel IMA Computer
For applications that do not require redundancy
At a glance
- Architecture
- Single channel
- Mass
- 350 g
- Power
- 10 W maximum
- Isolation
- Galvanically isolated
- RTOS
- ARINC 653 Part 1

Drag to rotate, scroll to zoom
The H2.X Computer is a high-performance single-channel computer optimized for high-throughput workloads, in particular Detect and Avoid (DAA).
Key capabilities
- Galvanic isolation: isolated interfaces protect the computer from electromagnetic noise and voltage spikes across aircraft buses.
- Safety monitoring: an independent challenge-response watchdog continuously monitors computational integrity.
- Sized for DAA: memory capacity is specified to execute advanced cooperative and non-cooperative Airborne Collision Avoidance System (ACAS) Xu/Xr algorithms.
System integration
The H2.X integrates with low Size, Weight, and Power (SWaP) four-quadrant interrogators and non-cooperative sensors as the central processor in a DAA system. It identifies intruders and issues automated avoidance and return-to-course maneuvers.
Modular platform
The H-series IMA computers are modular by design and share the same Hover Real-Time Operating System (H-RTOS) and Hover Software Development Kit (H-SDK). The H2.X is compatible with every H-series main processing board, including the safety-critical and edge inference boards.
Specifications
Physical
4 items
| Dimensions | 110 × 55 × 45 mm |
|---|---|
| Mass | 350 g |
| Cooling | Conduction-cooled, no forced air |
| Mounting | Three-point flange, dedicated grounding point |
Electrical
5 items
| Input voltage | 18.0 V to 32.2 V DC steady state |
|---|---|
| Nominal voltage | 28 V DC |
| Power consumption | 8 W typical, 10 W maximum |
| Galvanic isolation | On all external interfaces |
| Connectors | Modular, high-reliability EN4165 |
Processing
4 items
H2.0
| Main processing board | Safety-critical |
|---|---|
| Processors | 2 × Arm Cortex-A72 @ 800 MHz |
| Memory and storage | 16 GB SDRAM, 1 TB NAND flash and 1 GB NOR flash |
| Design assurance | DAL A |
H2.1
| Main processing board | Edge inference |
|---|---|
| Processors | 2 × Arm Cortex-A76 @ 1.8 GHz and 2 × Arm Cortex-A55 @ 1.5 GHz |
| Memory and storage | On-board eMMC |
| Design assurance | DAL C |
Environmental qualification (RTCA DO-160G)
15 items
| 4.5 Temperature / 4.6 Altitude | Category D2 |
|---|---|
| 5. Temperature variation | Category B |
| 6. Humidity | Category B |
| 7.2 Operational shock / 7.3 Crash safety | Category E |
| 8. Vibration | Category U |
| 10. Waterproofness | Category W |
| 12. Sand and dust | Category S |
| 16. Power input | Categories B and Z (2.5 ms power interruption) |
| 17. Voltage spike | Category A |
| 19. Induced signal susceptibility | Category ZN |
| 20. RF susceptibility | Radiated Y, conducted R |
| 21. RF emissions | Categories H and Q |
| 22. Lightning-induced transient susceptibility | B3K3L3 |
| 25. Electrostatic discharge | Category A |
| 26. Fire, flammability | Category C |
Specifications are typical values and subject to change. Contact us for the controlled datasheet before committing to a design.
Interfaces
Ethernet
3 × 1 GbE, IEEE 802.1 TSN
CAN FD
2, 5 Mbps
EIA-485
1, half-duplex, 50 Mbps
ARINC 429
2 tx / 4 rx (configurable)
General-purpose inputs
8
General-purpose outputs
5
Power
1 × 28 V input and ground
Interface availability and channel counts vary by configuration. Full pin-level detail is provided in the Interface Control Document.
Design assurance and qualification
- RTCA DO-160G environmental qualification
- RTCA DO-178C Level A (software)
- RTCA DO-254 Level A (complex hardware)
- RTCA DO-297 Integrated Modular Avionics (IMA) guidance
- TSO-C153a IMA platform authorization
Typical applications
- Autoflight computer
- Detect and Avoid computer
- Mission computer
Inside the H2.X

Request the full datasheet
Our engineering team can provide the complete datasheet, 3D Computer-Aided Design (CAD) STEP models, and the electrical and mechanical Interface Control Document (ICD) under a Non-Disclosure Agreement (NDA).


